It is currently Mon Dec 22, 2014 8:42 am

All times are UTC - 5 hours [ DST ]





Post new topic Reply to topic  [ 21 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: LWRCI Skirmish Sights
PostPosted: Thu Dec 02, 2010 5:51 pm 
Offline
Yes, I work here.
 Profile

Joined: Tue May 11, 2010 1:09 pm
Posts: 110
Are now available on the webstore!

ImageImage
ImageImage

http://www.lwrci.com/p-238-lwrci-skirmi ... front.aspx
http://www.lwrci.com/p-237-lwrci-skirmi ... -rear.aspx


Top
 

 Post subject: Re: LWRCI Skirmish Sights
PostPosted: Thu Dec 02, 2010 6:23 pm 
Offline
Super Ninja Piston Warrior. Pow!
 Profile

Joined: Thu Jul 10, 2008 8:19 pm
Posts: 2645
Location: Washington
Just got back from zeroing a set of these. Excellent work LWRCI.


Top
 

 Post subject: Re: LWRCI Skirmish Sights
PostPosted: Thu Dec 02, 2010 11:42 pm 
Offline
Piston Private Recruit
 Profile

Joined: Mon Nov 08, 2010 6:41 pm
Posts: 4
Are these now standard on new production rifles?


Top
 

 Post subject: Re: LWRCI Skirmish Sights
PostPosted: Thu Dec 02, 2010 11:48 pm 
Offline
Generalissimo of the Piston Revolution
User avatar
 Profile

Joined: Sat Sep 11, 2010 1:00 pm
Posts: 414
Location: colorado
lotsagas4u wrote:
Are these now standard on new production rifles?
some guys have reported having them on their recently bought lwrc..so the answer is yes


Top
 

 Post subject: Re: LWRCI Skirmish Sights
PostPosted: Fri Dec 03, 2010 2:42 am 
Offline
Piston Private
User avatar
 WWW  Profile

Joined: Wed Feb 11, 2009 6:18 pm
Posts: 40
Location: Idaho Falls, ID
TENMMIKE wrote:
lotsagas4u wrote:
Are these now standard on new production rifles?
some guys have reported having them on their recently bought lwrc..so the answer is yes


I received them on the REPR that arrived on Tuesday.

_________________
We are the sheepdogs, bad people looking out for the good people by killing worse people.


Top
 

 Post subject: Re: LWRCI Skirmish Sights
PostPosted: Fri Dec 03, 2010 3:55 am 
Offline
Piston Private Recruit
 Profile

Joined: Wed Oct 20, 2010 11:45 am
Posts: 23
They are on my M6A2. I bought it from Northwest Tactical, a few weeks ago. They are starting to grow on me.


Top
 

 Post subject: Re: LWRCI Skirmish Sights
PostPosted: Sat Dec 04, 2010 12:45 am 
Offline
Super Ninja Piston Warrior. Pow!
User avatar
 Profile

Joined: Fri Dec 12, 2008 6:43 pm
Posts: 3128
I'm sure they're well worth the Troy cost --- I would have loved to have seen them about $15-20 bucks a piece cheaper...if they had slotted in beneath Troys, I think you'd sell more than you could produce. As such, given the choice I'd still buy LWRCI probably. Good work.

_________________
"Boobs and AK's...it's what I do."


Top
 

 Post subject: Re: LWRCI Skirmish Sights
PostPosted: Sat Dec 04, 2010 10:57 am 
Offline
Piston Sergant
User avatar
 Profile

Joined: Sun Oct 21, 2007 11:44 pm
Posts: 220
They do look nice and clean. However, I kind of liked the MaTech rear sight that came on my last upper. Not going to rush out and buy a set though, my irons are back up only.


Top
 

 Post subject: Re: LWRCI Skirmish Sights
PostPosted: Sat Dec 04, 2010 11:21 am 
Offline
I AM Tactical.
User avatar
 Profile

Joined: Fri Aug 07, 2009 7:35 pm
Posts: 1094
Nice sights. Any plans to carry these in FDE?

_________________
* 6-years of loyal service *

ISLANDER'S LAW: Registration is Preparation for Confiscation.


Top
 

 Post subject: Re: LWRCI Skirmish Sights
PostPosted: Sat Dec 04, 2010 12:18 pm 
Offline
Super Ninja Piston Warrior. Pow!
 Profile

Joined: Mon Feb 23, 2009 10:26 pm
Posts: 2608
Location: TEXAS
Nice. Can't wait to see the set on my M6-SPR...that I hope to be able to order soon! :)

_________________
Watch your thoughts; they become words.
Watch your words; they become actions.
Watch your actions; they become habits.
Watch your habits; they become character.
Watch your character; it becomes your destiny.
--Frank Outlaw


Top
 

 Post subject: Re: LWRCI Skirmish Sights
PostPosted: Mon Dec 06, 2010 5:42 pm 
Offline
Super Ninja Piston Warrior. Pow!
User avatar
 Profile

Joined: Tue Feb 19, 2008 7:00 pm
Posts: 2851
Location: Central Virginia
Does the front sight accept the standard AR Front Sight Tool? If so, which variant (4-prong or 5-prong)?

_________________
10.5" M6A1, 12.7" M6A3, PSD/UCIW, 10.5" M6A2, 14.7" M6IC, 14.7" M6SL/IC Hybrid.


Top
 

 Post subject: Re: LWRCI Skirmish Sights
PostPosted: Mon Dec 06, 2010 9:50 pm 
Offline
Super Ninja Piston Expert
User avatar
 WWW  Profile

Joined: Wed Oct 25, 2006 8:09 am
Posts: 704
Location: NOVA
CarlosDJackal wrote:
Does the front sight accept the standard AR Front Sight Tool? If so, which variant (4-prong or 5-prong)?


They are designed to accept a 4 prong tool. I couldv'e simply gone with a standard square post, but I have found that the round post is crisper view and it allowed me to create a thinner arm profile by placing the detent at a 45 degree offset vs the standard 90 degree.

_________________
Master of low speed high drag!!!


Top
 

 Post subject: Re: LWRCI Skirmish Sights
PostPosted: Mon Dec 06, 2010 11:19 pm 
Offline
Super Ninja Piston Warrior. Pow!
 Profile

Joined: Thu Jul 10, 2008 8:19 pm
Posts: 2645
Location: Washington
Jesse, the front is cool, but the rear is the real money-maker on this set IMO. Small aperture. Can't say it enough.


Top
 

 Post subject: Re: LWRCI Skirmish Sights
PostPosted: Tue Dec 07, 2010 12:42 pm 
Offline
Piston Private
 Profile

Joined: Mon Jul 27, 2009 4:56 am
Posts: 95
Location: Comifornia
Wow, I really like these, If its true these are on new rifles, I'll be ecstatic because I like the multi-rear sight aperture. Used that on an HK platform and loved it.

_________________
:flag: :army:


Top
 

 Post subject: Re: LWRCI Skirmish Sights
PostPosted: Fri Dec 10, 2010 10:32 am 
Offline
Super Ninja Piston Warrior. Pow!
User avatar
 Profile

Joined: Tue Feb 19, 2008 7:00 pm
Posts: 2851
Location: Central Virginia
LWRC-Jesse wrote:
They are designed to accept a 4 prong tool. I couldv'e simply gone with a standard square post, but I have found that the round post is crisper view and it allowed me to create a thinner arm profile by placing the detent at a 45 degree offset vs the standard 90 degree.


I'm with you on that Jesse. I like it. Especially the rear BUIS and it's simplicity.

The only other question I have is it looks like the windage adjustment for the rear BUIS is on the left side. If so, what was the reasoning behind this departure from the norm?

_________________
10.5" M6A1, 12.7" M6A3, PSD/UCIW, 10.5" M6A2, 14.7" M6IC, 14.7" M6SL/IC Hybrid.


Top
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 21 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]



Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Untitled document

Powered by phpBB © phpBB Group  

Disclaimer - This forum is a customer discussion forum only! Any LWRC International customer inquiries should be directed through the "Contact" section of www.lwrci.com All messages made available as part of this discussion group (including any bulletin boards and chat rooms) and any opinions, advice, statements or other information contained in any messages posted or transmitted by any third party are the responsibility of the author of that message and not of LWRC International. The fact that a particular message is posted on or transmitted using this LWRC International forum does not mean that LWRC International has endorsed that message in any way or verified the accuracy, completeness or usefulness of any message. We encourage visitors to the forum to report any objectionable message to admin@lwrci.com. This forum is not monitored 24/7.