M6-SL - Rails

The M6 Series of Rifles and Carbines.

Moderators: STONEYARDER, van halen, jbour13, notaposer, LWRC-Jarred

M6-SL - Rails

Postby robert60446 » Mon Aug 12, 2013 11:39 am

Guys,
Quick question, i would like to repleace hand guards on my M6-SL with full length rail going behind front post, something like Daniel Defense AR15 Mk18 FSP RIS II. Any ideas?
Best regards
Robert
"Being Airborne means never having to miss the opportunity to remind people that you are better then they are."
robert60446
Rank 1 Newbie ★
 
Posts: 10
Joined: Sun Mar 24, 2013 2:07 pm

Re: M6-SL - Rails

Postby CarlosDJackal » Mon Aug 12, 2013 11:55 am

You'd have to cut off the front sight low enough for the rail to clear. If you end up doing so, Any railed handguard that clears the residual FSB/Gas Block should work. I was considering doing this and installing a Samson Evolution rail myself.

Good luck and be sure to post pics if you do this.
- 10.5" M6A1
- PSD/UCIW
- 10.5" M6A2 (2)
- 14.7" M6IC
- 14.7" M6SL/IC Hybrid
- 16" ODG REPR
User avatar
CarlosDJackal
Rank 8 General ★★★★★★★★
 
Posts: 3015
Joined: Tue Feb 19, 2008 7:00 pm
Location: Central Virginia

Re: M6-SL - Rails

Postby Snake » Mon Aug 12, 2013 12:21 pm

Sounds like he wants to keep his A-frame FSB. Think BCM EAG Carbine, 14.5" midlength w/ FSB & quad rail.
I am become Death, so that Life may become of you.

You are the Resistance.
User avatar
Snake
Rank 8 General ★★★★★★★★
 
Posts: 3282
Joined: Wed Jun 30, 2010 1:40 am

Re: M6-SL - Rails

Postby robert60446 » Mon Aug 12, 2013 12:30 pm

Snake wrote:Sounds like he wants to keep his A-frame FSB. Think BCM EAG Carbine, 14.5" midlength w/ FSB & quad rail.

Yes, i want to keep FSB.
Best regards
Robert
"Being Airborne means never having to miss the opportunity to remind people that you are better then they are."
robert60446
Rank 1 Newbie ★
 
Posts: 10
Joined: Sun Mar 24, 2013 2:07 pm

Re: M6-SL - Rails

Postby A.J. » Mon Aug 12, 2013 1:13 pm

Not sure if that DD rail is going to fit around the actual piston system.
A.J.
 

Re: M6-SL - Rails

Postby CarlosDJackal » Mon Aug 12, 2013 9:16 pm

- 10.5" M6A1
- PSD/UCIW
- 10.5" M6A2 (2)
- 14.7" M6IC
- 14.7" M6SL/IC Hybrid
- 16" ODG REPR
User avatar
CarlosDJackal
Rank 8 General ★★★★★★★★
 
Posts: 3015
Joined: Tue Feb 19, 2008 7:00 pm
Location: Central Virginia

Re: M6-SL - Rails

Postby xgame2k » Mon Aug 12, 2013 9:32 pm

M.O. has been playing with them:
Image
User avatar
xgame2k
Rank 4 Lieutenant ★★★★
 
Posts: 268
Joined: Sat Jan 05, 2013 8:00 pm
Location: Arizona

Re: M6-SL - Rails

Postby STONEYARDER » Mon Aug 12, 2013 10:42 pm

Whenever tyranny has reigned in history, the people were disarmed first.
“When injustice becomes law, resistance becomes duty.” -Thomas Jefferson
"The US government is at war with the American people" - The Patriot
STONEYARDER
Moderator
 
Posts: 3870
Joined: Thu Apr 28, 2011 12:48 am
Location: Mn.

Re: M6-SL - Rails

Postby Fongman » Thu Aug 15, 2013 8:32 pm

Doesn't one of the Samson rails do this?
Thinking about doing the same thing, but man it's hard to keep up with all the stuff out there now-a-days.
The 2nd amendment is not just a right, it's a responsibility. So train like it...
User avatar
Fongman
Rank 6 Major ★★★★★★
 
Posts: 806
Joined: Wed Oct 25, 2006 10:13 am
Location: TX

Re: M6-SL - Rails

Postby Fongman » Fri Aug 16, 2013 2:08 pm

Never mind...found my own answer.

I like the direction Modern Outfitters are going!
The 2nd amendment is not just a right, it's a responsibility. So train like it...
User avatar
Fongman
Rank 6 Major ★★★★★★
 
Posts: 806
Joined: Wed Oct 25, 2006 10:13 am
Location: TX

Re: M6-SL - Rails

Postby Snake » Sat Aug 17, 2013 2:22 pm

Check this out Robert:

viewtopic.php?f=53&t=14268
I am become Death, so that Life may become of you.

You are the Resistance.
User avatar
Snake
Rank 8 General ★★★★★★★★
 
Posts: 3282
Joined: Wed Jun 30, 2010 1:40 am

Re: M6-SL - Rails

Postby robert60446 » Mon Aug 19, 2013 11:40 am

Thank you guys. At least I have some options now.
Best regards
Robert
"Being Airborne means never having to miss the opportunity to remind people that you are better then they are."
robert60446
Rank 1 Newbie ★
 
Posts: 10
Joined: Sun Mar 24, 2013 2:07 pm

Re: M6-SL - Rails

Postby ffhounddog » Sat Jul 29, 2017 7:10 am

Any Rail that I can toss onto a M6SL? Are there any SPR rails I can get installed or a ARM-R midlength Rail?
ffhounddog
Rank 2 Private ★★
 
Posts: 61
Joined: Sat Nov 28, 2009 7:23 am
Location: DC Area



Return to LWRC Products



Who is online

Users browsing this forum: No registered users and 2 guests