REPR parts that wear out

Forum for the 7.62 R.E.P.R. series.

Moderators: STONEYARDER, van halen, jbour13, notaposer, LWRC-Jarred

REPR parts that wear out

Postby CarlosDJackal » Thu Feb 04, 2016 6:18 pm

I am looking to order some parts that I would like to have on hand for my 16" REPR. I have already identified these as the following:

- 2 ea Action Spring (aka Buffer Spring)
- 1 ea Bolt Assembly
- 2 ea Extractors
- 2 ea (Bolt) Extractor Spring Kits
- 1 ea Gas Piston Components (cup(?) & spring)

The problem is the LWRCI webstore really sucks. Not only is it slow, I never know if I will find the items I want to order between one session or another. And some of them are represented multiple times (ie: Buffer Spring) so I never know which item I should purchase. I know one time I found the Gas Piston components for the REPR. But the last time I tried again, I could not find it to save my life.

Plus since there are at least three (3) Buffer Springs identified; I'd like to know which one I should order (the stock one that came with my REPR works just fine). Anyone have any idea if the webstore will be fixed so that it is more user friendly?

What parts have you purchased for your REPR?
- 10.5" M6A1
- PSD/UCIW
- 10.5" M6A2 (2)
- 14.7" M6IC
- 14.7" M6SL/IC Hybrid
- 16" ODG REPR
User avatar
CarlosDJackal
Rank 8 General ★★★★★★★★
 
Posts: 3015
Joined: Tue Feb 19, 2008 7:00 pm
Location: Central Virginia

Re: REPR parts that wear out

Postby bastardsonofelvis » Thu Feb 04, 2016 6:33 pm

When I bought a second REPR I went hogwild and bought just about everything they sold to keep them running through the end times, to include another BCG. I bet if you call CS and list out everything you want they can just take your order down without you having to deal with the interface. I haven't tried to purchase anything yet from the new page but it's a bummer to hear it's not user friendly -- not that the old one was, either, though.
Try not. Do. Or do not. There is no try. -Yoda
User avatar
bastardsonofelvis
Rank 8 General ★★★★★★★★
 
Posts: 2172
Joined: Tue Jul 26, 2011 1:50 am
Location: Mountain Colorado

Re: REPR parts that wear out

Postby CarlosDJackal » Thu Feb 04, 2016 9:30 pm

That's a darn good idea!! I'll have to give that a try. Thanks Elvis Jr. :)
- 10.5" M6A1
- PSD/UCIW
- 10.5" M6A2 (2)
- 14.7" M6IC
- 14.7" M6SL/IC Hybrid
- 16" ODG REPR
User avatar
CarlosDJackal
Rank 8 General ★★★★★★★★
 
Posts: 3015
Joined: Tue Feb 19, 2008 7:00 pm
Location: Central Virginia

Re: REPR parts that wear out

Postby jimbo45 » Fri Feb 05, 2016 8:19 am

I bought the below before the website changed. Having the sku's might help you.
U04-0065A01 R.E.P.R Piston Maintenance Kit-R.E.P.R Operating Rod 1 $75.00 $22.50 $52.50

200-0051A01 7.62 Bolt Extractor Spring Kit 1 $8.00 $2.40 $5.60

U06-0066C02 7.62x51mm R.E.P.R Extractor 1 $39.95 $11.99 $27.97

U06-0010C01 Firing Pin Retaining Pin 1 $1.50 $0.45 $1.05

U06-0009C03 R.E.P.R. Cam Pin 1 $12.00 $3.60 $8.40

U06-0013C01 R.E.P.R. Firing Pin 1 $8.00 $2.40 $5.60
jimbo45
Rank 2 Private ★★
 
Posts: 76
Joined: Thu May 03, 2012 7:02 pm

Re: REPR parts that wear out

Postby CarlosDJackal » Mon Feb 08, 2016 3:45 pm

jimbo45 wrote:I bought the below before the website changed. Having the sku's might help you.
U04-0065A01 R.E.P.R Piston Maintenance Kit-R.E.P.R Operating Rod 1 $75.00 $22.50 $52.50

200-0051A01 7.62 Bolt Extractor Spring Kit 1 $8.00 $2.40 $5.60

U06-0066C02 7.62x51mm R.E.P.R Extractor 1 $39.95 $11.99 $27.97

U06-0010C01 Firing Pin Retaining Pin 1 $1.50 $0.45 $1.05

U06-0009C03 R.E.P.R. Cam Pin 1 $12.00 $3.60 $8.40

U06-0013C01 R.E.P.R. Firing Pin 1 $8.00 $2.40 $5.60


Thanks, jimbo!!
- 10.5" M6A1
- PSD/UCIW
- 10.5" M6A2 (2)
- 14.7" M6IC
- 14.7" M6SL/IC Hybrid
- 16" ODG REPR
User avatar
CarlosDJackal
Rank 8 General ★★★★★★★★
 
Posts: 3015
Joined: Tue Feb 19, 2008 7:00 pm
Location: Central Virginia



Return to R.E.P.R. (Rapid Engagement Precision Rifle)



Who is online

Users browsing this forum: No registered users and 2 guests