Frequently Asked Questions. Use this forum to ask and get answers to your common questions regarding both LWRCI products, or anything firearms related.

Moderators: STONEYARDER, van halen, jbour13, notaposer, LWRC-Jarred


Postby The Big Kahuna » Sat May 07, 2016 4:48 pm

Has anyone taken apart their PDW/PSD piston assembly? For the life of me I cannot pull the piston out utilizing the procedure I normally use (and as the manual describes) with all of my longer uppers. There doesn't seem to be enough play in the piston to get it angled enough to slide it out past the piston cup. Any input would be appreciated.
The Big Kahuna
Rank 3 Chief ★★★
Posts: 143
Joined: Sat Jan 05, 2013 3:14 pm

Re: PDW/PSD PIston

Postby Kdog » Sat May 07, 2016 8:49 pm

I've done it, tight but doable. Make sure the BCG is locked back or removed. Sorry I have no other tricks.

Sent from my iPhone using Tapatalk
#130 M6 IC
Ambi 14.7" M6-SL
10.5" M6 IC A5
IC PSD Pistol
Six8 Lower
Rank 4 Lieutenant ★★★★
Posts: 219
Joined: Mon Jan 23, 2012 8:00 am

Re: PDW/PSD PIston

Postby STONEYARDER » Sat May 07, 2016 9:35 pm

Have someone put a finger on the nozzle so it doesnt slide back on you while you pull on the intermediate rod. They changed the piston system a little and that rod actually locks into the piston rod now so the whole system wants to slide back together. You just need a third arm now.
Whenever tyranny has reigned in history, the people were disarmed first.
“When injustice becomes law, resistance becomes duty.” -Thomas Jefferson
"The US government is at war with the American people" - The Patriot
Posts: 3867
Joined: Thu Apr 28, 2011 12:48 am
Location: Mn.

Re: PDW/PSD PIston

Postby rcrandall » Sat May 07, 2016 9:57 pm

I use pliers, carefully of course.
Write drunk; edit sober - Ernest Hemingway
Posts: 4291
Joined: Wed Aug 22, 2007 6:23 pm

Return to FAQ

Who is online

Users browsing this forum: No registered users and 2 guests